عنوان

Advances in materials processing :

9789811301063

9789811301070

9811301069

9811301077

9789811301063

Advances in materials processing :

[Book]

proceedings of Chinese Materials Conference 2017 /

Yafang Han, editor.

Singapore :

Springer,

[2018]

©2018

1 online resource :

illustrations (some color)

Lecture notes in mechanical engineering

Includes bibliographical references.

Intro; Preface; Contents; 1 Plasma Nitriding of 2024 Al Alloy Deposited with Ti Film: Effects of N2-H2 Ratio on Microstructure Evolution and Mechanical Properties; Abstract; Introduction; Experimental Details; Materials; Coating Process; Characterization; Results and Discussions; Microstructure Evolution; Mechanical Properties; Summary; Acknowledgements; References; 2 Microstructure and Welding Performance of Sn-Ag-Cu Material; Abstract; Introduction; Experimental Procedure; Results and Discussion; Microstructure of the Alloy; Welding Performance; Summary; Acknowledgements; References.

AcknowledgementsReferences; 6 Effect of Fiber Content on Surface Performance of Potassium Titanate Whiskers and Carbon Fiber-Reinforced Phenolic Composites; Abstract; Introduction; Experimental Details; Materials and Sample Preparation; Measurement of Physical Properties; Friction and Wear Test; Results; Physical and Mechanical Properties; Tribological Behavior; Worn Surface and Wear Debris Analysis; Conclusion; References; 7 Influence of Surface Buffer Layer Thickness and Deposition Rate on the Release Rate of Silver Ions in Ag-TiOx Nanocomposites; Abstract; Introduction; Experimental.

Mechanism of Dual-Sided Laser Peening Modes on Residual Stress Distribution Along DepthConclusion; Acknowledgements; References; 5 Preparation and Wear Behavior of Enamel Coating on Ti-6Al-4V ELI Titanium Alloy; Abstract; Introduction; Experimental Materials and Methods; Experimental Materials; Preparation of Enamel Coating; Characterization of Enamel Coating; Results and Discussion; The Surface Tridimensional Morphology of Enamel Coating; Cross Sectional Morphology of the Coating; Adhesion Strength of the Coating; Friction Behavior of the Coating; Wear Resistance of the Coating; Conclusions.

Results and DiscussionDifferent Thickness Barrier Deposition with Moderate Rate (5 nm/min); Different Thickness Barrier Deposition with High Rate (20 nm/min); Summary; Acknowledgements; References; 8 Analysis on the Major Environmental Factors Affecting the Weather Resistance of Polyester Coating; Abstract; Introduction; Test Procedure; Specimen Preparation; Test Sites; Test Method; Color Aberration; Glossiness; Experiment Result Analysis; Color Aberration Analysis; Glossiness Analysis; Summary; References.

0

8

8

8

This proceedings volume gathers selected papers presented at the Chinese Materials Conference 2017 (CMC2017), held in Yinchuan City, Ningxia, China, on July 06-12, 2017. This book covers a wide range of material surface science, advanced preparation and processing technologies of materials, high purity materials, silicon purification technology, solidification science and technology, performance and structure safety of petroleum tubular goods and equipment materials, materials genomes, materials simulation, computation and design. The Chinese Materials Conference (CMC) is the most important serial conference of the Chinese Materials Research Society (C-MRS) and has been held each year since the early 1990s. The 2017 installment included 37 Symposia covering four fields: Advances in energy and environmental materials; High performance structural materials; Fundamental research on materials; and Advanced functional materials. More than 5500 participants attended the congress, and the organizers received more than 700 technical papers. Based on the recommendations of symposium organizers and after peer reviewing, 490 papers have been included in the present proceedings, which showcase the latest original research results in the field of materials, achieved by more than 300 research groups at various universities and research institutes.

Springer Nature

com.springer.onix.9789811301070

9789811301063

Manufacturing processes, Congresses.

Materials, Congresses.

Materials Science.

Numerical and Computational Physics, Simulation.

Operating Procedures, Materials Treatment.

Surfaces and Interfaces, Thin Films.

Tribology, Corrosion and Coatings.

Manufacturing processes.

Materials.

TECHNOLOGY & ENGINEERING-- Industrial Engineering.

TECHNOLOGY & ENGINEERING-- Industrial Technology.

TECHNOLOGY & ENGINEERING-- Manufacturing.

TECHNOLOGY & ENGINEERING-- Technical & Manufacturing Industries & Trades.

PNRX

TEC-- 009060

TEC-- 018000

TEC-- 020000

TEC-- 040000

TGM

Han, Yafang

Chinese Materials Conference(2017 :, Yinchuan Shi, China)

20200823223421.0

pn

[Book]

Y