عنوان

Mechanical effects of welding :

0387552405

3540552405

3642847331

9780387552408

9783540552406

9783642847332

b574587

Mechanical effects of welding :

[Book]

IUTAM Symposium, Luleå, Sweden, June 10-14, 1991

L. Karlsson, L.-E. Lindgren, M. Jonsson (eds.).

Berlin

New York : Springer-Verlag

1992. ©1992.

xv, 287 pages : illustrations ; 24 cm

At head of title: International Union of Theoretical and Applied Mechanics.

Constitutive Modelling of Metals at High Temperatures.- Coupling Heat Transfer, Microstructure Evolution and Thermal Stress Analysis in Weld Mechanics.- Very High Homologous Temperature Constitutive Models for Semi-Solid and Solid Metals.- Transformation Plasticity (TRIP) under a Triaxial Stress State.- Research on Welding Stresses during Phase Transformation.- Modelling Phase Transformations for the Calculation of Internal Stresses During Fast Heating and Cooling in Steels.- The Analytical Method of Bainite Transformation Evaluation in Microalloyed Steels in the Process of Rapid Cooling.- Calculations of Temperatures, Strains and Stresses.- Thermal Problems of Welding.- Three-Dimensional Simulation of a Laser Surface Treatment through Steady State Computation in the Heat Source's Comoving Frame.- Temperature Fields and Stress States in Welded Tubes of Rectangular Cross Section.- Residual Stresses and Residual Deformations.- The Characteristics of the Source of Welding Residual Stress (Inherent Strain) and its Application to Measurement and Prediction.- Residual Stress Distributions after Welding as a Consequence of the Combined Effect of Physical, Metallurgical and Mechanical Sources.- Measurements of Residual Strains and Stresses.- Measurement of Residual Stress Distributions Near the Toe of a Weld between a Bracket and a Plate Using the Crack Compliance Method.- The Neutron Strain Scanner: Measurements in Welds.- Effects of Defects and Residual Stresses on Fracture and Fatigue.- Effect of Weld Metal Mis-match on Toughness Requirements: Some Simple Analytical Considerations using the Engineering Treatment Model (ETM).- Compressive Strength of Structural Members with Undermatching Weld Joints.- Effect of Mechanical Heterogeneity on the Absorbed Energy of Welded Joint.- On the Correlation between Charpy Notch Toughness and Fracture Toughness of Base and Weld Metal.- Poster Session.- Three Dimensional Finite Element Modeling of Welded Structures.- Influence of Weldmatching on Mechanical Behaviours.- Combined Solid and Shell Element Modelling of Welding.- Mathematical Modelling of Molten Pool in Arc Welding.- Computation of Temperature Distribution due to Welding in Piping Systems.- Effects of Residual Stresses on Creep Deformation.- Design of Weldments in Structures Subjected to Creep.- Creep Behaviour of 304 Stainless Steel Welded Joints Composed of Two Different 308 Weld Metals.- Effects of Residual Deformations and Residual Stresses on Buckling.- The Influence of Welding Stresses and Distortions on the Stability of Shells of Revolution.- Influences of Welding Imperfections on Stiffness of Rectangular Plate under Thrust.- Influence of Residual Stresses and Deformation on Buckling Behaviour of Plates.- Harmonic Response of a Spot Welded Box Beam - Influence of Welding Residual Stresses and Deformations.

Deformations (Mechanics) -- Congresses.

Residual stresses -- Congresses.

Welding -- Congresses.

L. Karlsson, L.-E. Lindgren, M. Jonsson (eds.).

International Union of Theoretical and Applied Mechanics.

L -E Lindgren

L Karlsson

M Jonsson

[Book]

Y