عنوان

Titanium Science and Technology

9781475713466

9781475713480

b403765

Titanium Science and Technology

[Book]

edited by Robert I. Jaffee, Harris M. Burte.

Boston, MA :

Imprint: Springer,

1973.

Introductory Papers -- Introductory Remarks -- Keynote Address -- Banquet Address -- Current Uses and Future Possibilities, Including Economics and Materials Policy -- Critical Review -- Manufacturing Exercise Involved in the Redesign of the Hawker Siddeley Trident (Tri-Jet) Fuselage -- B-1 Cost/Weight Trade Methodology -- Design and Development Support for Critical Helicopter Applications in Ti-6A1-4V Alloy -- Flat Rolled Beta Titanium Alloys for Airframe Application -- Applications of the High Strength Alloy Ti-4A1-4Mo-2Sn-0.5Si in European Aircraft Projects -- Titanium! The Bridge to Composites -- Titanium Castings for Marine Propellers -- Titanium Tubing and Fittings for Deep Submergence Hydraulic Systems -- Some Technical Considerations on the Use of Titanium Condenser Tubing in Public Utility Power Generation Turbines -- Titanium Corrosion in Distillation Columns -- The Role of Titanium in Anodizing and Electroplating -- Recent Development in the Application of Titanium for Motorcars -- Winning and Refining -- Critical Review -- Murso Process for Producing Rutile Substitute -- Reduction of Ilmenite and Ilmenite Ores -- Methods of Titanium Powders Production -- The Interaction of Titanium with Refractory Oxides -- Potential Extractive Processes for Titanium Scrap Reclamation -- Consolidation, Primary and Secondary Fabrication -- Critical Review -- The Effect of the Rate of Filling Moulds on the Solidification of Titanium-Alloy Ingots -- Durarc® Process for Melting and Casting Titanium -- Some New Results about Casting of Titanium in the Electron Beam Melting Furnace -- Study of Residual Stresses in Cast Titanium Alloys -- Titanium Powder Metallurgy By Decomposition Sintering of the Hydride -- Titanium P/M Preforms, Parts and Composites -- Hot Isostatic Pressing of Titanium 6A1-4V -- Lubrication of Titanium Alloys under Conditions of Bulk Plastic Deformation -- The Influence of Process Variables on the Pressure Requirements for the Extrusion of Titanium Alloy Rods -- Titanium Precision Forgings -- Manufacturing Method and Mechanical Properties of Large Annular Forgings of Two-Phase Titanium Alloy -- Influence of Hot Working on the Properties of the Ti 6A1 4V Alloy with Special Regard to Heavy Sections -- The Manufacturing of Aircraft-Quality Hydraulic Tubing with the Ti-3A1-8V-6Cr-4Mo-4Zr Alloy -- Procedures and Precautions in Machining Titanium Alloys -- Smelting of Primary Ingots and Their Remelting in Plasma-Arc Furnaces with Cooled Molds -- Joining, Quality, Assurance, and Inspection -- Critical Review -- Metallurgical and Technological Features of Titanium Alloy Welding When Using Fluxes -- Microstructure Control in Welds of the Ti-6A1-6V-2Sn Alloy -- Factors Affecting the Ductility and Microstructure of Ti-6a1-6v-2sn Titanium Alloy Weldments -- Electron Beam Welding of Ti-6A1-6V-2Sn Plate -- Weld Optimisation and Fatigue Tests on Low Voltage Electron Beam Welded 2in (51mm) Thick Ti-6A1-4V Alloy -- Some Fatigue Properties of Welds in two Titanium Sheet Alloys -- Pressure Requirements for Diffusion Bonding Titanium -- Fatigue Behavior of Diffusion Bonded Ti-6A1-4V Having Very Small Defects -- Correlation of Diffusion Bonded Ti-6A1-4V Properties with Acoustic Emission, Pulse-Echo and Fractographic Data -- Failure Experience with and Failure Anticipation in Titanium Components -- Effects of Ti-6A1-4V Alloy Metallurgical Structures on Ultrasonic Response Characteristics -- The Effects of Stress on the Detection of Fatigue Cracks by Ultrasonic Technique -- Ultrasonic Inspection of Titanium Airframe Components -- Non-Destructive Inspection of Titanium Jet Engine Disks -- Measurement by X-Ray Diffraction of Macro-Stresses and Micro-Stresses in Titanium and a Titanium Alloy -- Nondestructive Detection of Hydrides and Alpha-Case in Titanium Alloys.

0

9781475713480

Springer eBooks

Materials.

Jaffee, Robert I.

Burte, Harris M.

SpringerLink (Online service)

20190307162800.0

[Book]

Y