عنوان

Advances in Cryogenic Engineering

9781475705348

9781475705362

b403753

Advances in Cryogenic Engineering

[Book]

Proceedings of the 1960 Cryogenic Engineering Conference University of Colorado and National Bureau of Standards Boulder, Colorado August 23-25, 1960 /

edited by K. D. Timmerhaus.

Boston, MA :

Imprint: Springer,

1961.

Advances in Cryogenic Engineering,

6

0065-2482 ;

Space Technology -- A-1 Status of Electric Propulsion Systems for Space Missions -- A-2 Experimental Performance and Selection of Cryogenic Rocket Insulation Systems -- A-3 Progress Report on Development of High-Efficiency Insulation -- A-4 Improvement of Evacuated Aerogel Powder Insulation -- A-5 Back-Diffusion into Stored Cryogenic Liquids Venting to the Atmosphere -- Applications -- B-1 Superconducting Cryogenic Motors -- B-2 Compact Joule-Thomson Refrigeration Systems 15 to 60°K -- B-3 A New Refrigeration System for 4.2°K -- B-4 The Cryogenic Gyro -- B-5 Spaceborne Cryostats for Continuous Operation -- B-6 Selection of Lubricants and Thread Compounds for Oxygen Missile Systems -- B-7 Principle of a Liquid Nitrogen Irradiation Device and its Realization for Use in a Swimming-Pool Type Reactor -- B-8 The Direct Current Transformers -- Superconductivity -- C-1 Superconductivity -- C-2 Superconducting Rectifiers -- C-3 Superconducting Resonant Cavities -- C-4 Superconducting Magnets -- Processes -- D-1 Liquid Hydrogen from Refinery Waste Gases -- D-2 Explosion Hazards of Liquid Hydrogen -- D-3 Vacuum Pumping with Cryogenic Fluids -- D-4 Comparison of Liquid Pumping and Gas Compression in Gas-Producing Oxygen Plants -- D-5 Wear and Friction of Impregnated Carbon Seal Materials in Liquid Nitrogen and Hydrogen -- D-6 Elastomers for Static Seals at Cryogenic Temperatures -- D-7 Bearing Lubrication at Low Temperatures -- D-8 Studies of the Low-Temperature Distillation of Hydrogen Isotopes -- D-9 Evaluation of Ball Bearing Separator Materials Operating Submerged in Liquid Nitrogen -- Transfer Phenomena -- E-1 An Analytical Method for Estimating Gas Requirements in the Pressurization and Transfer of Cryogenic Fluids -- E-2 Pressure Phenomena during Transfer of Saturated Cryogenic Fluids -- E-3 Pressurized Transfer of Cryogenic Fluids from Tanks in Liquid-Nitrogen Baths -- E-4 Design of Piping for Cryogenic Fluids -- E-5 Calculations Relating to the Pressure Change in a Vented Tank Being Filled with Liquid Oxygen -- E-6 Dynamic Response of Fluid and Wall Temperatures during Pressurized Discharge of a Liquid from a Container -- E-7 Pressurized Cool-Down of a Cryogenic Liquid Transfer System Containing Vertical Sections -- E-8 The Design and Testing of a 6000 GPM Liquid Oxygen Pump Transfer System -- Equipment -- F-1 A Helium3 Refrigerator -- F-2 Design Considerations for Cryogenic Liquid Refill Systems for Cooling Infrared Detection Cells -- F-3 Infrared Detector Refrigerators -- F-4 Tensile Cryostat for the Temperature Range 4° to 300°K -- F-5 Design and Operation of a High-Accuracy Calibration Stand for Cryogenic Flowmeters -- F-6 A Durable and Reliable Test Stand System for High-Accuracy Temperature Measurements in the Cryogenic Ranges of Liquid Hydrogen and Liquid Oxygen -- F-7 A Simple Transfer Tube for Liquid Helium -- F-8 A Method and Apparatus for Concentrating Trace Impurities in Analyzing Grade-A Helium -- F-9 A New Method for Detection of Liquid Level of Cryogenic Fluids -- Physical Equilibria and Related Properties -- G-1 A Comparison of Methods of Predicting Equilibrium Gas Phase Compositions in Pressurized Binary Systems Containing an Essentially Pure Condensed Phase -- G-2 Application of the Corresponding States Principle to Mixtures of Low Molecular Weight Gases at Low Temperatures and Elevated Pressures -- G-3 Phase Equilibrium of the Nitrogen-Hydrogen System in the Critical Region of Hydrogen -- G-4 Approximate Wide-Range Equation of State for Hydrogen -- G-5 The Adsorption of Methane on Silica Gel at Low Temperatures -- G-6 Phase Equilibria in the CO2-Methane Systems -- G-7 A Preliminary Temperature-Entropy Diagram for Neon -- Heat Transfer and Thermometry -- H-1 The Non-Adiabatic Flow of an Evaporating Cryogenic Fluid through a Horizontal Tube -- H-2 A Study of Heat and Mass Transfer to Uninsulated Liquid Oxygen Containers -- H-3 Single-Tube Heat Transfer Tests with Liquid Hydrogen -- H-4 Experimental Heat Transfer and Pressure Drop of Film Boiling Liquid Hydrogen Flowing through a Heated Tube -- H-5 Some Aspects of the Design and Operation of Low Temperature Regenerators -- H-6 Low-Temperature Thermocouple Thermometry -- H-7 Reproducibilities of Carbon and Germanium Thermometers at 4.2°K -- H-8 Floating Polystyrene Beads as Insulation for Cryogenic Fluids -- H-9 Conversion Correction for Evaluating Net Heat Flux into a Liquid Hydrogen Container -- Mechanical Properties -- J-1 Mechanical Properties of Four Austenitic Stainless Steels at Temperatures between 300° and 20°K -- J-2 Low Temperature Mechanical Properties of 300 Series Stainless Steel and Titanium -- J-3 Gamma to Alpha Transformation in Austenitic Stainless Steel under Stress (single and repeated) down to 20°K -- J-4 The Fatigue Properties of Aluminum Alloy 5083-H113 Plate and Butt Weldments at 75° and -300°F -- J-5 Properties of 7000 Series Aluminum Alloys at Cryogenic Temperatures -- J-8 Low-Temperature Research on Transuranic Metals -- J-7 A Simplified Determination of Crystallinity of Fluoroplastics and the Prediction of Their Behavior at Cryogenic Temperatures -- J-8 New Data on Aluminum Alloys for Cryogenic Applications -- Indexes -- Author Index -- Cumulative Subject Index for Volumes 1 to 5.

0

9781475705362

Springer eBooks

Science (General).

Timmerhaus, K. D.

SpringerLink (Online service)

20190301073500.0

[Book]

Y